Coconut Products

Coconut Flour Fibre Claims: What "Source of Fibre" and "High Fibre" Require on EU, UK and US Labels

By E-Silk Route Ventures · · Updated

Coconut Flour Fibre Claims: What "Source of Fibre" and "High Fibre" Require on EU, UK and US Labels

Buyer’s snapshot

  • A food can carry a “source of fibre” claim in the EU at 3 g per 100 g or 1.5 g per 100 kcal, and a “high fibre” claim at 6 g per 100 g or 3 g per 100 kcal (Regulation (EC) No 1924/2006, Annex). Great Britain retains the same figures.
  • The US works differently: a “good source” claim needs 10 to 19% of the Daily Value per serving reference amount, and “high” needs 20% or more (21 CFR 101.54), measured per serving, not per 100 g.
  • Silk Foods Ceylon (SFC) lists coconut flour at 39 g fibre per 100 g and 400 kcal. The flour clears every threshold. Your finished product is what gets tested.
  • At 39 g per 100 g, a bakery mix needs about 8% coconut flour for “source” and about 16% for “high” in the EU, before any baking loss.
  • First-order MOQ for coconut products is 100 kg per SKU, made at the BRCGS and FSSC 22000 V6 audited Matale facility and by approved Sri Lankan coconut processors. The table further down shows the inclusion maths.

A fibre claim is a lab number turned into a sentence on a pack, and the sentence is what regulators read. Coconut flour is one of the few ingredients that can carry a claim by itself, which tempts brands to print it on products where the flour is a minor ingredient. This guide is for formulators and regulatory teams at gluten-free, bakery and functional-food brands who need to know what the claim requires in each market and how much flour it takes.

The flour’s baking behaviour and fat loss are covered in the coconut flour bakery spec and substitution guide, so this post stays with the claim.

What do “source of fibre” and “high fibre” require in the EU and UK?

A “source of fibre” claim requires at least 3 g of fibre per 100 g or at least 1.5 g per 100 kcal. A “high fibre” claim requires at least 6 g per 100 g or at least 3 g per 100 kcal. These conditions sit in the Annex to Regulation (EC) No 1924/2006 and apply to the food as sold, in the EU and, as retained law, in Great Britain.

The thresholds also catch wording with the same meaning. “Good source of fibre” or “packed with fibre” is treated as a nutrition claim and must meet the matching condition, so rephrasing does not avoid the test. In Great Britain, claims must also match the entries in the GB nutrition and health claims register, and Northern Ireland follows the EU text directly. The register wording changes, so confirm the current entry before artwork is final.

Two details catch teams out. The thresholds are alternatives: a product passes if it meets either the per-100 g or the per-100 kcal test. And the test applies to the finished food, not to the ingredient list.

Spec snapshot: Coconut flour (COCO-FLR), SFC catalogue Botanical: Cocos nucifera L., Sri Lanka Dietary fibre: 39 g per 100 g Energy: 400 kcal per 100 g Fat: 13 g per 100 g (12 g saturated) Protein: 18 g per 100 g Appearance: fine, free-flowing powder, off-white to cream Shelf life: 12 to 24 months Certification: BRCGS, FSSC 22000 V6, GMP attestation

Does coconut flour pass on its own?

Yes, with a wide margin. At 39 g per 100 g, coconut flour is above the 6 g “high fibre” line by a factor of about six. On the energy test it supplies 9.75 g of fibre per 100 kcal (39 g divided by 400 kcal, times 100), above the 3 g threshold by a factor of three. So a retail pack of plain coconut flour can carry a “high fibre” claim in the EU and Great Britain.

The US test is also met. The reference amount customarily consumed for flours is 30 g (21 CFR 101.12). That serving holds 11.7 g of fibre, which is about 42% of the 28 g Daily Value that FDA set in 2016 and well above the 20% needed for “high” or “excellent source”.

One number needs care. Published analyses of coconut flour from virgin coconut oil processing report higher figures, 46 to 60 g per 100 g in the range cited in the earlier guide, and the SFC catalogue lists 39 g. The published range reflects other processing routes. For a label, neither is the number that counts. The number that counts is the fibre value on the batch COA, measured by the method you name in the contract.

How much coconut flour does a finished food need?

Work backwards from the claim. A finished food needs 3 g of fibre per 100 g for “source” and 6 g for “high” in the EU. At 39 g per 100 g of flour, that is a flour share of about 7.7% and 15.4% of the finished weight, assuming the flour is the only fibre source. Other ingredients with fibre lower the share needed.

Coconut flour in finished food (as sold)Fibre from flour per 100 gEU claim reached
5%1.95 gNone
8%3.1 gSource of fibre
10%3.9 gSource of fibre
15%5.9 gSource of fibre, just short of high
16%6.2 gHigh fibre
20%7.8 gHigh fibre
30%11.7 gHigh fibre

Baking changes the picture in your favour. Water leaves in the oven, the weight of the finished piece falls, and fibre per 100 g of baked product rises. The claim is judged on the product as sold, so measure the baked product and do not rely on the dough calculation.

The US test runs on a different basis. It asks for 20% of the Daily Value per reference amount of the finished food. As an illustration only, for a food with a 50 g reference amount, “high” needs 5.6 g of fibre in 50 g, which is 11.2 g per 100 g and roughly 29% coconut flour if flour is the only source. The real reference amount depends on the product category in 21 CFR 101.12, so check it before running the sum.

From the Trade Team The most common mistake on this topic is putting the flour’s number on the pack. A muffin with 8% coconut flour has not inherited the flour’s 39 g. It has about 3 g, and that is the number a trading standards officer or an FDA reviewer will test.

What counts as fibre, and which method proves it?

Under the EU rules, dietary fibre means carbohydrate polymers with three or more monomeric units that are neither digested nor absorbed in the human small intestine. Intact, naturally occurring plant fibre qualifies, and coconut flour is that: the cell-wall fraction of the coconut kernel, left in place after oil and milk extraction. Codex uses a ten-unit threshold and leaves 3 to 9 units to national authorities, which is why a fibre figure can differ between markets for blends with added oligosaccharides, but not for a whole-kernel flour.

The US definition covers non-digestible carbohydrates and lignin that are intrinsic and intact in plants. FDA’s list of approved isolated fibres matters for added fibres such as inulin or resistant dextrin, not for a flour whose fibre is the original plant matrix. Confirm this with your regulatory adviser for your specific product.

The method is where claims fail in practice. AOAC 2009.01 is the method the European Commission accepted as best suited to the Codex definition, and it appears in the guidance that supports Regulation (EU) No 1169/2011. Older gravimetric methods can return different numbers. Name the method in your specification and ask SFC to report fibre on the COA by that method, because a gap of a few grams between two labs is enough to move a product across a threshold.

What else comes attached to a fibre claim?

A fibre claim brings three other label obligations.

  1. US fat disclosure. If a fibre claim is made and the food is not low in total fat, the label must state the total fat per serving next to the claim (21 CFR 101.54(d)). Coconut flour carries 13 g fat per 100 g, and most bakery recipes add oil or butter, so expect the disclosure.
  2. EU and GB nutrition declaration. A nutrition claim requires the nutrition declaration on the pack, even where it would otherwise be exempt.
  3. Health claims are separate. “Source of fibre” is a nutrition claim. A statement about gut health or regularity is a health claim and needs an authorised wording.

The glycaemic angle in the flour’s own literature is also a health-claim matter. A study result on glycaemic index is a finding, not a label statement.

Buyer’s checklist: before printing a fibre claim on a coconut flour product

  1. Fibre per 100 g and per 100 kcal on the batch COA, by a named method (AOAC 2009.01 where the Codex definition applies)
  2. Fibre measured on the finished, baked product as sold, not calculated from the dough
  3. The claim wording checked against the register or CFR section for each destination market
  4. US reference amount for the product category confirmed, with the Daily Value percentage worked out
  5. Total fat per serving displayed beside any US fibre claim
  6. Residual fat ceiling and fibre floor written into the flour specification
  7. Tolerance for batch-to-batch fibre variation reflected in the claim margin
  8. Allergen position for coconut confirmed for each target market

Where the Silk Route Ventures model doesn’t fit A brand that wants a fibre claim on a product with only a few percent coconut flour. The claim will not hold and SRV will say so at the quote stage. The better route is a higher inclusion level or a different ingredient.

How should the flour specification support the claim?

Write the fibre floor into the specification at a level below the typical result, so natural variation does not take a finished product under the line. If the claim is “high fibre” at 16% inclusion, a flour running at the low end of its range leaves little margin, and a few points of inclusion cost less than a relabelled batch.

Pair the fibre floor with the other limits that shape the flour: residual fat, moisture and free fatty acids. Fat affects the claim twice, once through the US disclosure and once through shelf life, because a higher-fat grade ages faster. The fat and moisture trade-offs are covered in the coconut flour spec guide, and the Ceylon desiccated coconut and coconut flour capability brief sets out what the Matale line can hold. The same discipline applies to other claim-led coconut ingredients, as the coconut sugar GI claims post shows for the glycaemic claim.

For UK-bound products, the GB labelling rules guide covers the wider labelling picture.

Frequently asked questions

How much fibre does coconut flour contain?

SFC lists coconut flour at 39 g of fibre per 100 g and 400 kcal per 100 g. Published analyses report higher ranges, so rely on the batch COA. At 39 g it exceeds the EU “high fibre” threshold of 6 g per 100 g by about six times (Regulation (EC) No 1924/2006).

Can a muffin made with coconut flour say “high in fibre”?

Only if the finished muffin meets the threshold, not the flour. In the EU that means at least 6 g per 100 g or 3 g per 100 kcal as sold. At 39 g per 100 g of flour, that takes roughly 16% flour by weight if it is the only fibre source.

Does Silk Foods Ceylon offer private label coconut flour?

Yes. Silk Route Ventures (SRV) supplies coconut flour in bulk and under the buyer’s own label, made at the Matale facility and by approved Sri Lankan coconut processors, with a first-order MOQ of 100 kg per SKU for coconut products. Production takes 2 to 3 weeks from PO to dispatch for standard SKUs (4 to 6 weeks for private label, custom specifications and organic orders). Ask for fibre by a named method on the COA.

Is the US fibre claim the same as the EU one?

No. The US measures against the Daily Value per reference amount of the finished food: 10 to 19% for “good source” and 20% or more for “high”, with a fat disclosure when the food is not low in fat (21 CFR 101.54). The EU uses fixed grams per 100 g or per 100 kcal.

How Silk Route Ventures can help

Silk Route Ventures (SRV) supplies coconut flour in bulk and under the buyer’s own label, made at the BRCGS and FSSC 22000 V6 certified Silk Foods Ceylon facility in Matale, Central Province, and by approved Sri Lankan coconut processors. The first-order MOQ for coconut products is 100 kg per SKU, production takes 2 to 3 weeks from PO to dispatch for standard SKUs (4 to 6 weeks for private label, custom specifications and organic orders), and sea freight adds 3 to 4 weeks to the EU and Australia or 4 to 5 weeks to the US. For a claim-led formulation, the SRV R&D and NPD team works to a maximum of 3 to 4 weeks from signed brief to approved formulation. Brands comparing the full coconut range can start with the Sri Lankan coconut products range, then contact us to send an inquiry or request a coconut flour sample and COA.

Sources

  1. Regulation (EC) No 1924/2006 on nutrition and health claims made on foods, Annex (conditions for “source of fibre” and “high fibre”). https://eur-lex.europa.eu/eli/reg/2006/1924/oj (retrieved 13 October 2026, thresholds confirmed via search summary of the Annex text)
  2. Code of Federal Regulations, 21 CFR 101.54, nutrient content claims for “good source”, “high”, “more” and “high potency”. https://www.law.cornell.edu/cfr/text/21/101.54 (retrieved 13 October 2026)
  3. Code of Federal Regulations, 21 CFR 101.12, reference amounts customarily consumed. https://www.law.cornell.edu/cfr/text/21/101.12 (retrieved 13 October 2026)
  4. Megazyme, Dietary fiber regulations (EU definition, Codex definition, AOAC 2009.01). https://www.megazyme.com/focus-areas/dietary-fiber-portal/dietary-fiber-regulations (retrieved 13 October 2026, via search summary)
  5. Silk Foods Ceylon product catalogue, Coconut Flour (COCO-FLR): nutrition, sensory, shelf life and dietary data.

Written by the Silk Route Ventures Trade Team. Silk Route Ventures (E-Silk Route Ventures (Pvt) Ltd) is a Sri Lankan B2B supply-chain operator for the Food, Beverage, Wellness, and Nutraceuticals sectors. The Silk Foods Ceylon manufacturing arm holds BRCGS and FSSC 22000 V6 certifications. Questions or to request a sample: Contact us or email info@esilkroute.com.lk.

Sourcing authentic Ceylon produce?

Talk to our team about products, specifications and quotes.